{"id":12672,"date":"2018-04-11T07:23:09","date_gmt":"2018-04-11T07:23:09","guid":{"rendered":"https:\/\/data-flair.training\/blogs\/?p=12672"},"modified":"2021-05-09T13:10:58","modified_gmt":"2021-05-09T07:40:58","slug":"impala-troubleshooting-performance-tuning","status":"publish","type":"post","link":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/","title":{"rendered":"What is Impala Troubleshooting & Performance Tuning"},"content":{"rendered":"

While we know how to diagnose and debug problems in Impala<\/strong>, that is what we call Impala Troubleshooting-performance tuning methods. So, in this article, “Impala Troubleshooting-performance tuning” we will study several ways of diagnosing and debugging problems in Impala.<\/span><\/p>\n

So, let’s start Impala Troubleshooting \/ Known Issues.<\/p>\n

Impala Troubleshooting & Performance Tuning<\/span><\/h2>\n

Basically, being able to diagnose and debug problems in Impala, is what we call Impala Troubleshooting-performance tuning. <\/span><\/p>\n

It includes performance, network connectivity, out-of-memory conditions, disk space usage, and crash or hangs conditions in any of the Impala-related daemons. However, there are several ways, we can follow for diagnosing and debugging of above-mentioned problems.<\/span><\/p>\n

So, let\u2019s discuss Impala Troubleshooting-performance tuning methods one by one:<\/span><\/p>\n

i. Impala Performance tuning<\/span><\/h3>\n

Here, are some factors which are affecting the performance of Impala features, and procedures. Especially, \u00a0for tuning, monitoring, and benchmarking Impala queries and other SQL operations.<\/span>
\n<\/span>
\n<\/span>We will also explain techniques for maximizing Impala scalability. Like, Scalability. It is tied to performance. That implies performance remains high as the system workload increases.\u00a0Let’s understand this with an example. <\/span><\/p>\n

Reducing the disk I\/O performed by a query can speed up an individual query, and at the same time improve scalability by making it practical to run more queries simultaneously. <\/span><\/p>\n

Sometimes, an optimization technique improves scalability more than performance. <\/span><\/p>\n

For example, reducing memory usage for a query might not change the query performance much, but might improve scalability by allowing more Impala queries or other kinds of jobs to run at the same time without running out of memory.<\/span>
\n<\/span>
\n<\/span>Note: Make sure your system is configured with all the recommended minimum hardware requirements, before starting any performance tuning or benchmarking, for Impala.<\/span><\/p>\n

    \n
  • Partitioning of Impala Tables<\/strong><\/li>\n<\/ul>\n

    This technique allows queries to skip reading a large percentage of the data in a table also divides the data based on the different values infrequently queried columns.<\/span><\/p>\n

      \n
    • Performance Considerations for Join Queries<\/strong><\/li>\n<\/ul>\n

      Basically, we can tune Joins. They are the main class of queries at the SQL level, as opposed to changing physical factors. <\/span><\/p>\n

      Such as the file format or the hardware configuration. However, \u00a0Overview of Table Statistics and the related topics Overview of Column Statistics are also important primarily for join performance.<\/span><\/p>\n

        \n
      • Overview of Table Statistics and Overview of Column Statistics<\/strong><\/li>\n<\/ul>\n

        By using the COMPUTE STATS statement, collecting table and column statistics. So, without requiring changes to SQL query statements, that helps Impala automatically optimize the performance for join queries. <\/span><\/p>\n

        Well, make sure that in Impala 1.2.2 and higher this process is greatly simplified. Since the COMPUTE STATS statement collects both kinds of statistics in one operation. Also, it does not require any setup and configuration as was previously necessary for the ANALYZE TABLE statement in Hive.<\/span><\/p>\n

          \n
        • Testing Impala Performance<\/strong><\/li>\n<\/ul>\n

          Before conducting any benchmark tests, do some post-setup testing, in order to ensure Impala is using optimal settings for performance.<\/span><\/p>\n

            \n
          • Benchmarking Impala Queries<\/strong><\/li>\n<\/ul>\n

            Basically, for doing performance tests, the sample data and the configuration we use for initial experiments with Impala is often not appropriate.<\/span><\/p>\n

              \n
            • Controlling Impala Resource Usage<\/strong><\/li>\n<\/ul>\n

              We can expect the better query performance while the more memory Impala can utilize. We must make tradeoffs in a cluster running other kinds of workloads as well. It helps to make sure all Hadoop<\/strong> components have enough memory to perform well. So we might cap the memory that Impala can use.<\/span><\/p>\n

                \n
              • Using Impala with the Amazon S3 Filesystem<\/strong><\/li>\n<\/ul>\n

                When the data is stored in Hadoop Distributed File System<\/strong>\u00a0(HDFS)<\/strong>, have different performance characteristics than Queries against data stored in the Amazon Simple Storage Service (S3).<\/span><\/p>\n

                ii. Impala Troubleshooting Quick Reference<\/span><\/h3>\n

                There is the list of common problems and potential solutions in Impala. Such as:<\/span><\/p>\n

                  \n
                • Impala takes a long time to start<\/strong><\/li>\n<\/ul>\n

                  Explanation:<\/b> Since the metadata for Impala objects is broadcast to all Impalad nodes and cached. So, \u00a0Impala instances with large numbers of tables, partitions, or data files take longer to start.<\/span>
                  \nRecommendation: <\/b>Try to adjust timeout and synchronicity settings.<\/span><\/p>\n

                    \n
                  • Joins fail to complete<\/strong><\/li>\n<\/ul>\n

                    Explanation: <\/b>It occurs due to insufficient memory. Hence, \u00a0data from the second, third, and so on sets to be joined is loaded into memory during a join. Also, note that the query could exceed the total memory available if Impala chooses an inefficient join order or join mechanism.<\/span>
                    \n<\/span>
                    \n<\/span>Recommendation: <\/b>Start by gathering statistics with the COMPUTE STATS statement for each table involved in the join. <\/span><\/p>\n

                    Consider specifying the [SHUFFLE] hint so that data from the joined tables are split up between nodes rather than broadcast to each node. If tuning at the SQL level is not sufficient, add more memory to your system or join smaller data sets.<\/span><\/p>\n

                      \n
                    • Queries return incorrect results<\/strong><\/li>\n<\/ul>\n

                      Explanation: <\/b>After changes are performed in Hive, Impala metadata may be outdated.<\/span>
                      \n<\/span>
                      \n<\/span>Recommendation: <\/b>Hence, use the appropriate Impala statement, rather than switching back and forth between Impala and Hive<\/strong>. Such as INSERT, LOAD DATA, CREATE TABLE<\/strong>, ALTER TABLE<\/strong>, COMPUTE STATS, and so on.<\/span><\/p>\n

                      Moreover, \u00a0Impala automatically broadcasts the results of DDL and DML operations to all Impala nodes in the cluster. Although, when such changes are made through Hive it does not automatically recognize.<\/span><\/p>\n

                        \n
                      • Queries are slow to return results<\/strong><\/li>\n<\/ul>\n

                        Explanation: <\/b>It is possible that we cannot use native checksumming in Impala. Basically, to compute checksums over HDFS data very quickly Native checksumming uses machine-specific instructions.<\/span><\/p>\n

                        So, review Impala logs. On reviewing once you find instances of “INFO util.NativeCodeLoader that means native checksumming is not enabled.<\/span>
                        \n<\/span>
                        \n<\/span>Recommendation: <\/b>Just make sure Impala is configured to use native checksumming.<\/span><\/p>\n

                          \n
                        • Queries are slow to return results
                          \n<\/strong><\/li>\n<\/ul>\n

                          Explanation: <\/b>Like,<\/span> to use data locality tracking, Impala may not be configured.<\/span>
                          \n<\/span>
                          \n<\/span>Recommendation: <\/b>So, do make configuration changes, also test Impala for data locality tracking as necessary.<\/span>
                          \n<\/span><\/p>\n

                          iii. Troubleshooting Impala SQL Syntax Issues<\/span><\/h3>\n

                          There are times when queries issued against Impala fail. \u00a0At that times, we can try running these same queries against Hive. <\/span><\/p>\n

                          However, once a query fails against both Impala and Hive, that is a problem with your query or other elements of your environment. Then such things:<\/span><\/p>\n

                            \n
                          1. \u00a0To ensure your query is valid to try reviewing the Language Reference.<\/span><\/li>\n
                          2. Also, check Impala Reserved Words. Since any database, table, column, or other object names in your query conflict with Impala reserved words. Further, Quote those names with backticks (“).<\/span><\/li>\n
                          3. Moreover, to confirm whether Impala supports all the built-in functions, check Impala Built-In Functions being used by your query. Also, check whether argument and return types are the same as you expect.<\/li>\n
                          4. For identifying the source of the problem review the contents of the Impala logs for any information that may be useful<\/span>.<\/span><\/li>\n<\/ol>\n

                            Well, in some scenario there is a problem with your Impala installation<\/strong> if a query fails against Impala but not Hive.<\/p>\n

                            iv. Impala Web User Interface for Debugging<\/span><\/h3>\n

                            There is a built-in web server in each of the Impala daemons.<\/span> Basically, that displays diagnostic and status information itself. Such as:<\/p>\n

                              \n
                            • The Impalad web UI (default port: 25000)<\/strong> <\/span><\/li>\n<\/ul>\n

                              This daemon displays various information of queries. Such as configuration settings, running and completed queries, and associated performance and resource usage. Moreover, \u00a0including a graphical representation of the plan, the Details link for each query displays alternative views of the query. <\/span><\/p>\n

                              Also, the output of the EXPLAIN, SUMMARY, and PROFILE statements from impala-shell. However, this daemon is mainly for diagnosing query problems that can be traced to a particular node.<\/span><\/p>\n

                                \n
                              • The Statestored web UI (default port: 25010)<\/strong><\/li>\n<\/ul>\n

                                Moreover, it provides information through checks performed by this daemon. Such as memory usage, configuration settings, and ongoing health. Hence, we view the web UI only on the particular host that serves as the Impala Statestore, since there is only a single instance of this daemon within any cluster.<\/span><\/p>\n

                                  \n
                                • The Catalogd web UI (default port: 25020)<\/strong> <\/span><\/li>\n<\/ul>\n

                                  The Catalogd web UI <\/span>shows various information about the daemon itself. Such as databases, tables, and other objects managed by Impala, in addition to the resource usage and configuration settings. This information is displayed as the underlying Thrift data structures. <\/span><\/p>\n

                                  Also, we view the web UI only on the particular host that serves as the Impala Catalog Server, since there is only a single instance of this daemon within any cluster.<\/span><\/p>\n

                                  iv. Troubleshooting I\/O Capacity Problems<\/span><\/h3>\n

                                  However, Impala queries are typically I\/O-intensive. Impala queries could show slow response times with no obvious cause on the Impala side since there is an I\/O problem with storage devices, or with HDFS itself. <\/span><\/p>\n

                                  Because queries involving clauses, Slow I\/O on even a single DataNode could result in an overall slowdown. Such as ORDER BY, GROUP BY, or JOIN do not start returning results until all DataNodes have finished their work.<\/span><\/p>\n

                                  So, in order to test whether the Linux I\/O system itself is performing as expected. Do run Linux commands like the following on each DataNode:<\/p>\n

                                  $ sudo sysctl -w vm.drop_caches=3 vm.drop_caches=0\nvm.drop_caches = 3\nvm.drop_caches = 0\n<\/pre>\n
                                  $ sudo dd if=\/dev\/sda bs=1M of=\/dev\/null count=1k\n1024+0 records in\n1024+0 records out\n1073741824 bytes (1.1 GB) copied, 5.60373 s, 192 MB\/s\n<\/pre>\n
                                  $ sudo dd if=\/dev\/sdb bs=1M of=\/dev\/null count=1k\n1024+0 records in\n1024+0 records out\n1073741824 bytes (1.1 GB) copied, 5.51145 s, 195 MB\/s\n<\/pre>\n
                                  $ sudo dd if=\/dev\/sdc bs=1M of=\/dev\/null count=1k\n1024+0 records in\n1024+0 records out\n1073741824 bytes (1.1 GB) copied, 5.58096 s, 192 MB\/s\n<\/pre>\n
                                  $ sudo dd if=\/dev\/sdd bs=1M of=\/dev\/null count=1k\n1024+0 records in\n1024+0 records out\n1073741824 bytes (1.1 GB) copied, 5.43924 s, 197 MB\/s<\/pre>\n
                                  Moreover, a throughput rate of less than 100 MB\/s typically indicates a performance issue with the storage device, on modern hardware. Hence,\u00a0 before continuing with Impala tuning or benchmarking correct the hardware problem.<\/span><\/p>\n
                                  So, this was all about Impala Troubleshooting & Performance Tuning. Hope you like our explanation.<\/p>\n
                                  Conclusion – Impala TroubleShooting<\/span><\/h2>\n
                                  As a result, we have seen various ways for diagnosing and debugging of problems in Impala. Still, if any doubt occurs, regarding Impala Troubleshooting-performance tuning, feel free to ask in the comment section.<\/p>\n","protected":false},"excerpt":{"rendered":"
                                  While we know how to diagnose and debug problems in Impala, that is what we call Impala Troubleshooting-performance tuning methods. So, in this article, “Impala Troubleshooting-performance tuning” we will study several ways of diagnosing...<\/p>\n","protected":false},"author":6,"featured_media":19291,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[27],"tags":[1708,2973,6537,16630,9430,14641],"class_list":["post-12672","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-impala","tag-benchmarking-impala-queries","tag-controlling-impala-resource-usage","tag-impala-known-issues","tag-impala-troubleshooting","tag-partitioning-of-impala-tables","tag-testing-impala-performance"],"yoast_head":"\nWhat is Impala Troubleshooting & Performance Tuning - DataFlair<\/title>\n<meta name=\"description\" content=\"Impala Troubleshooting & performance tuning- Impala Known Issues, Problems face in Impala, Impala Troubleshooting I\/O Capacity Problems,Quick Reference\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"What is Impala Troubleshooting & Performance Tuning - DataFlair\" \/>\n<meta property=\"og:description\" content=\"Impala Troubleshooting & performance tuning- Impala Known Issues, Problems face in Impala, Impala Troubleshooting I\/O Capacity Problems,Quick Reference\" \/>\n<meta property=\"og:url\" content=\"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/\" \/>\n<meta property=\"og:site_name\" content=\"DataFlair\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/DataFlairWS\/\" \/>\n<meta property=\"article:published_time\" content=\"2018-04-11T07:23:09+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-05-09T07:40:58+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2018\/06\/Impala-Troubleshooting-performance-tuning-01-1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"628\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"DataFlair Team\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@DataFlairWS\" \/>\n<meta name=\"twitter:site\" content=\"@DataFlairWS\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"DataFlair Team\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"What is Impala Troubleshooting & Performance Tuning - DataFlair","description":"Impala Troubleshooting & performance tuning- Impala Known Issues, Problems face in Impala, Impala Troubleshooting I\/O Capacity Problems,Quick Reference","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/","og_locale":"en_US","og_type":"article","og_title":"What is Impala Troubleshooting & Performance Tuning - DataFlair","og_description":"Impala Troubleshooting & performance tuning- Impala Known Issues, Problems face in Impala, Impala Troubleshooting I\/O Capacity Problems,Quick Reference","og_url":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/","og_site_name":"DataFlair","article_publisher":"https:\/\/www.facebook.com\/DataFlairWS\/","article_published_time":"2018-04-11T07:23:09+00:00","article_modified_time":"2021-05-09T07:40:58+00:00","og_image":[{"width":1200,"height":628,"url":"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2018\/06\/Impala-Troubleshooting-performance-tuning-01-1.jpg","type":"image\/jpeg"}],"author":"DataFlair Team","twitter_card":"summary_large_image","twitter_creator":"@DataFlairWS","twitter_site":"@DataFlairWS","twitter_misc":{"Written by":"DataFlair Team","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#article","isPartOf":{"@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/"},"author":{"name":"DataFlair Team","@id":"https:\/\/data-flair.training\/blogs\/#\/schema\/person\/2c58ecb4f73a39f0ef993f1ddfcd7b89"},"headline":"What is Impala Troubleshooting & Performance Tuning","datePublished":"2018-04-11T07:23:09+00:00","dateModified":"2021-05-09T07:40:58+00:00","mainEntityOfPage":{"@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/"},"wordCount":1546,"commentCount":2,"publisher":{"@id":"https:\/\/data-flair.training\/blogs\/#organization"},"image":{"@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#primaryimage"},"thumbnailUrl":"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2018\/06\/Impala-Troubleshooting-performance-tuning-01-1.jpg","keywords":["Benchmarking Impala Queries","Controlling Impala Resource Usage","Impala Known Issues","Impala TroubleShooting","Partitioning of Impala Tables","Testing Impala Performance"],"articleSection":["Impala Tutorials"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/","url":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/","name":"What is Impala Troubleshooting & Performance Tuning - DataFlair","isPartOf":{"@id":"https:\/\/data-flair.training\/blogs\/#website"},"primaryImageOfPage":{"@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#primaryimage"},"image":{"@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#primaryimage"},"thumbnailUrl":"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2018\/06\/Impala-Troubleshooting-performance-tuning-01-1.jpg","datePublished":"2018-04-11T07:23:09+00:00","dateModified":"2021-05-09T07:40:58+00:00","description":"Impala Troubleshooting & performance tuning- Impala Known Issues, Problems face in Impala, Impala Troubleshooting I\/O Capacity Problems,Quick Reference","breadcrumb":{"@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#primaryimage","url":"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2018\/06\/Impala-Troubleshooting-performance-tuning-01-1.jpg","contentUrl":"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2018\/06\/Impala-Troubleshooting-performance-tuning-01-1.jpg","width":1200,"height":628,"caption":"Impala troubleshooting & Performance Tuning"},{"@type":"BreadcrumbList","@id":"https:\/\/data-flair.training\/blogs\/impala-troubleshooting-performance-tuning\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Blog Home","item":"https:\/\/data-flair.training\/blogs\/"},{"@type":"ListItem","position":2,"name":"Impala Tutorials","item":"https:\/\/data-flair.training\/blogs\/category\/impala\/"},{"@type":"ListItem","position":3,"name":"What is Impala Troubleshooting & Performance Tuning"}]},{"@type":"WebSite","@id":"https:\/\/data-flair.training\/blogs\/#website","url":"https:\/\/data-flair.training\/blogs\/","name":"DataFlair","description":"Learn Today. Lead Tomorrow.","publisher":{"@id":"https:\/\/data-flair.training\/blogs\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/data-flair.training\/blogs\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/data-flair.training\/blogs\/#organization","name":"DataFlair","url":"https:\/\/data-flair.training\/blogs\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/data-flair.training\/blogs\/#\/schema\/logo\/image\/","url":"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2016\/07\/Data-Flair.png","contentUrl":"https:\/\/data-flair.training\/blogs\/wp-content\/uploads\/sites\/2\/2016\/07\/Data-Flair.png","width":106,"height":48,"caption":"DataFlair"},"image":{"@id":"https:\/\/data-flair.training\/blogs\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/DataFlairWS\/","https:\/\/x.com\/DataFlairWS","https:\/\/www.linkedin.com\/company\/dataflair-web-services-pvt-ltd\/","https:\/\/www.youtube.com\/user\/DataFlairWS"]},{"@type":"Person","@id":"https:\/\/data-flair.training\/blogs\/#\/schema\/person\/2c58ecb4f73a39f0ef993f1ddfcd7b89","name":"DataFlair Team","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/1ce4a0e3e542444fc73bbebf83e89e8b73e2d95ccb1fcee64da9945f078b97c5?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/1ce4a0e3e542444fc73bbebf83e89e8b73e2d95ccb1fcee64da9945f078b97c5?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/1ce4a0e3e542444fc73bbebf83e89e8b73e2d95ccb1fcee64da9945f078b97c5?s=96&d=mm&r=g","caption":"DataFlair Team"},"description":"The DataFlair Team provides industry-driven content on programming, Java, Python, C++, DSA, AI, ML, data Science, Android, Flutter, MERN, Web Development, and technology. Our expert educators focus on delivering value-packed, easy-to-follow resources for tech enthusiasts and professionals.","url":"https:\/\/data-flair.training\/blogs\/author\/dfteam2\/"}]}},"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/posts\/12672","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/comments?post=12672"}],"version-history":[{"count":1,"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/posts\/12672\/revisions"}],"predecessor-version":[{"id":94034,"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/posts\/12672\/revisions\/94034"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/media\/19291"}],"wp:attachment":[{"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/media?parent=12672"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/categories?post=12672"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/data-flair.training\/blogs\/wp-json\/wp\/v2\/tags?post=12672"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}